Posted:2006-04-28 By hardware review Number of View:7568
COOLER MASTER SUSURRO COOLER -
PERFORMANCE TEST TEMP
By :hardware review
Posted:2006-04-28
xtreview is your : Video card - cpu - memory - Hard drive - power supply unit source
Cooler Master Susurro Cooler - performance test temp
Besides serving as a container, the package is also informative. It explains you how the cooler works and what characteristics it has.
Specification
CoolerMaster Susurro (RR-KCT-T9E)
Socket
Socket 754, 939, 940 and M2
Compatibility
AMD Athlon 64 X2 5000+ and up AMD Athlon 64 FX-59 and up AMD Athlon 64 4200+ and up AMD Sempron 3800+ and up
Heatsink dimensions
77 x 92 x 40 mm (L x W x H)
Heatsink material
Pure copper (99.97%)
Fan
92 x 25 mm (compatible with 80mm)
Fan rotation speed
800~2800 RPM (managed by thermal diode)
MTBF
50 000 h
Bearings
Rifle bearing
Noise
16 dBA (min)
Heatsink weight
685g (without fan)
Fan weight
75g
This is the single cooler in this review that lacks heat pipes, yet it has trumps of its own.
First, it is all made of copper. Second, it is small. And third, it is very quiet. A thermal sensor controls the speed of the fan.
The cooler’s base isn’t polished at all, though:
And the sensor resides in a very improper location – in the middle of the heatsink. Placed like that, it will sooner react to a heat dissipation growth of the graphics card rather than of the central processor.
To tell you the truth, I had expected the Cooler Master Susurro to get the last place in the end, but it helped overclock the CPU to 2.7GHz at 1.4V, and the CPU temperature was 69°C. This is not low, of course, but better than the result of the previous model. This is to show you that heat pipes are important, but also require a competent overall design of the cooler. The speed of the fan rose from 800rpm in idle mode to 2200rpm which is far from the specified
maximum of 2800rpm. So, the result of the Susurro might have been even better if the sensor were located properly
xtreview is your : Video card - cpu - memory - Hard drive - power supply unit source
we would be happy to answer for your question . if you have suggestion or comment
regarding this review our support would be glad to help just join our forum and ask u will get the best answer
to discuss check our forum section :-)